← Blog
November 16, 2026 · 15 min read · Won2Build

Timecard Rounding Rules for Subcontractors: What's Legal

Federal timecard rounding rules in plain English for US subcontractors: the 7-minute rule, the neutrality test, California limits, and a worked payroll example.

Timecard Rounding Rules for Subcontractors: What’s Legal

Worker clocking in at a construction site

Rounding timecards is legal under federal law only if it is neutral and averages out. Over time, your crews must be paid for every minute they actually worked. Rounding that always trims time in your favor is a wage violation, however small each cut looks. For a subcontractor running several crews across several jobs, the safest setup is one where the real start and stop times are captured in the field and stay available to the office. That makes any rounding policy something you can check against actual hours.

This guide covers the federal rule, how the 5-, 6- and 15-minute conventions work, a worked example with real dollars, where California differs, and how to write a policy you can defend.

Won2build
Keep Crew Time Records in View
Won2Build’s Time Budge helps subcontractors track labor, with real-time data synchronization between field and office.
Visit

TL;DR

  • Federal rule: rounding to the nearest 5 minutes, tenth of an hour or quarter hour is accepted only if it does not shortchange employees over a period of time.
  • Neutral means it works both ways. Rounding that only ever goes down, or only favors the company, is the problem.
  • The 7-minute rule: 1 to 7 minutes round down, 8 to 14 minutes round up, applied to both clock-ins and clock-outs.
  • California is stricter. Courts there have questioned rounding at all when exact punch times are already recorded.
  • Keep the original punch data, review it against paid hours regularly, and put the policy in writing.

Table of Contents

What the federal rule actually says

The core text is 29 CFR 785.48, the Department of Labor’s regulation on time clocks. It makes two points that matter to you.

First, time clocks are not required. Where you use them, employees who come in early or stay late voluntarily, without working, do not have to be paid for that time. Small differences between clock records and actual hours usually cannot be avoided, but large discrepancies should be discouraged because they raise doubts about how accurate your records are.

Second, rounding is accepted. Under subsection (b), the Department of Labor will accept rounding start and stop times to the nearest 5 minutes, one-tenth of an hour or quarter hour, as long as it does not result, over a period of time, in failure to pay employees for all the time they actually worked.

The key phrase is “over a period of time.” Federal law does not ask whether every single punch is exact. It asks whether the overall pattern pays people for the hours they worked.

The Texas Workforce Commission puts the same idea in practical terms in its FLSA training page on rounding: rounding is permissible only if it works both ways, sometimes to the employee’s advantage and sometimes to their disadvantage, so it balances out. It also notes that the separate “de minimis” idea in 29 CFR 785.47 covers only a few seconds or minutes that are hard to record, not a routine habit of trimming time.

How the 5-, 6- and 15-minute conventions work

Most payroll systems use one of three increments. Each divides the hour into equal blocks and sends a punch to the nearest block boundary.

Increment Block size Punch rounds down Punch rounds up
5 minutes 1/12 hour 1 or 2 minutes past the mark 3 or 4 minutes past the mark
6 minutes (tenth of an hour) 0.1 hour Up to 2 minutes past 3 to 5 minutes past
15 minutes (quarter hour) 0.25 hour 1 to 7 minutes past 8 to 14 minutes past

The quarter-hour version is the “7-minute rule” you hear about. The Department of Labor describes it in Fact Sheet #53: the FLSA allows rounding to the nearest quarter hour, time from 1 to 7 minutes may be rounded down, and time from 8 to 14 minutes must be rounded up. The fact sheet was written for health care employers, but the rounding arithmetic is the same for any industry. It also warns that always rounding down can violate minimum wage and overtime rules.

North Carolina’s labor department describes the same convention on its page about recording time and rounding: rounding is fine if it is consistent “up and down,” with 7 minutes rounding down and 8 minutes rounding up. That page also confirms that the state does not require time cards, but does require an accurate record of hours worked each day and each workweek.

How the 5-, 6- and 15-minute conventions work

A quick example

Your crew’s day starts at 7:00 a.m., and a laborer punches in at 6:56 and out at 3:34 p.m.

  • Quarter-hour rounding with the 7-minute rule moves 6:56 to 7:00, since 4 minutes is within 7 of the mark.
  • Clock-out at 3:34 is 4 minutes past 3:30, so it rounds down to 3:30.

The laborer is paid 7:00 to 3:30. Tomorrow the same laborer might punch in at 7:09 (rounds to 7:15) and out at 3:38 (rounds to 3:45). The rounding sometimes costs the worker and sometimes helps. That balance is exactly what the rule is built around.

The neutrality test: facially neutral and neutral in practice

A rounding policy has to pass two checks.

  1. Neutral on its face. The written rule treats start and stop times the same way and does not favor the employer. “Round every clock-in up to the next quarter hour and every clock-out down” fails here.
  2. Neutral in application. Over time, the actual results do not consistently cost employees pay.

The Department of Labor applied this in a 2019 Wage and Hour Division opinion letter, which accepts rounding to the nearest five minutes, tenth of an hour, quarter hour or half hour as long as it averages out. The Nevada Employers’ Association’s summary of that letter adds a caution worth heeding: opinion letters are a reliable baseline, but they lack the force of law and are fact-specific, so they are not blanket approval for every practice.

The Ninth Circuit looked at the same question in Corbin v. Time Warner Entertainment. It upheld a quarter-hour policy and rejected the idea that every employee must come out even or ahead in every pay period. The test is whether employees were properly paid over a period of time.

The practical lesson: a policy that is neutral on paper still needs to be checked against real results. If your crews tend to punch in a few minutes early and out right at quit time, the 7-minute rule may in practice give the company a net gain. Measure it instead of assuming.

A worked example with real dollars

Here is a hypothetical to show how small cuts add up. Say you run 10 journeymen at $35 an hour, and your rounding setup trims an average of 6 minutes (0.1 hour) per person per day, always in the company’s favor.

  • Per worker per day: 0.1 hour × $35 = $3.50
  • Ten workers: $35 per day
  • 250 working days: $8,750 per year

That is before overtime. When the trimmed minutes would have pushed someone past 40 hours in a week, they are owed at time and a half, so the shortfall grows. Back pay claims can look back across multiple years and involve every worker affected, so a habit that feels like rounding error on a Friday can turn into a serious liability. The amounts above are illustrative, not drawn from any case.

Now flip it. If the same 6 minutes were a true wash, with some punches rounded up and some down, the total would net to roughly zero and the policy would be defensible. The difference is entirely in whether it is two-way.

Why construction crews are a special case

Rounding is easy on an office floor with one door and one clock. Subcontractor crews are harder.

  • Punches happen in different places. Crews start at a trailer, a lay-down yard, a shop or the job itself.
  • Foremen enter time for others. A single end-of-day entry for six people tends to produce round numbers that were never punched.
  • Hours split across jobs. One worker may spend 3.5 hours on one project and 4.5 on another, and rounding each line separately can drift away from the real day.
  • Overtime thresholds matter. The 40th hour of the week is where small errors cost the most.

The rule that protects you here is simple: keep the original records. When the real start and stop times exist, you can prove your rounding is neutral, or skip rounding entirely. When only rounded numbers exist, you cannot prove anything. Our guides on construction timecard best practices and tracking labor hours on job sites go through how to set that up.

Inaccurate or consistently downward-rounded time records feed directly into common payroll mistakes that show up in audits and employee complaints, which is another reason to treat the underlying data with care.

California and other stricter states

Federal law sets the floor. States can be stricter, and California is the one subcontractors with work there watch most closely.

In See’s Candy Shops v. Superior Court (2012), a California appellate court held that an employer may use a nearest-tenth-of-an-hour rounding policy if it is fair and neutral on its face and does not, over a period of time, fail to compensate employees for all time actually worked. That mirrors the federal approach.

More recently, courts have shown less patience when exact time is already available. In Camp v. Home Depot (2022), the appellate court reversed summary judgment for the employer where it captured exact punch minutes and the employee’s records showed a net loss of 470 minutes between March 2015 and October 2020. The court limited its ruling to those facts, but it also pointed to the California Supreme Court’s observation that as technology evolves, the practical advantages of rounding may diminish.

The California Supreme Court has also taken up whether rounding can be applied to meal periods at all, in Donohue v. AMN Services. Treat meal breaks as a place where you should record real times, not rounded ones.

What this means in practice:

  • If you have California crews, pay on the actual recorded minutes. It removes the argument entirely.
  • Do not round meal period punches.
  • If you work in other states, check the state labor department’s guidance, because some publish their own rounding rules. North Carolina and Texas, cited above, are examples of states that do.

This article is general information for subcontractors, not legal advice. If you are designing a policy for crews in California or several states, have an employment attorney review it before you roll it out.

How to write a timecard rounding policy you can defend

If you do round, a written policy is your first line of defense. Here is a workable structure.

1. Pick one increment and apply it to everyone

Choose 5 minutes, 6 minutes or 15 minutes. Do not use different increments for different crews or different people. Smaller increments cost employees less in any single punch and are easier to defend.

2. Round both directions, at both ends

State that clock-ins and clock-outs follow the same rule. With a quarter hour, that means the 7-minute convention at every punch, not just at the start of the day.

3. Separate rounding from scheduling and discipline

You can discipline employees who punch in early without authorization or stay late without permission. The North Carolina labor department notes employers may do this, but overtime hours actually worked must still be paid at time and a half whether or not they were approved. Rounding is not a discipline tool. Handle lateness through attendance policy, not by docking time through the clock.

4. Do not shave time for tasks that are work

Time spent loading trucks, gathering tools, attending a toolbox talk or walking to the work area may be compensable depending on the facts. Section 785.48(a) says employees who come in early voluntarily, without working, need not be paid for that stretch. Once they are doing anything for you, the situation changes. If the question is unclear for your crews, ask an employment attorney.

5. Keep the raw punches

Store the original timestamps, not only the rounded totals. Anything you cannot reproduce from the original data becomes hard to defend.

6. Review the results on a schedule

Once a quarter, compare total rounded hours against total raw hours by person and by crew. If the rounded total is consistently lower, the policy is not neutral in practice, whatever the written version says. Adjust the increment, or stop rounding.

7. Tell employees how it works

Put the rule in the handbook, explain it at onboarding and make sure foremen know that the rule cannot be bent for one person. Foremen who round by feel are the most common source of a policy that fails in practice.

What good records look like

Whatever rounding choice you make, defensible timekeeping comes down to the same few habits.

  • Capture time where the work happens. Time entered from the field at the moment of work is more accurate than time reconstructed on Friday. Our piece on offline time tracking for construction field teams covers how crews record time on sites with weak signal.
  • Let the foreman approve, then lock it. Approved time that cannot quietly change protects both sides. See mobile foreman timecard approvals.
  • Tie hours to projects. Split time by job so that job cost and payroll agree. This is covered in our multi-project time tracking guide.
  • Watch overtime in real time. Rounding errors are most expensive near 40 hours, which is why field-first overtime tracking matters.
  • Keep buddy punching and padding out. Rounded or exact, time records only work if the right person is recorded at the right time. Our article on time theft in construction goes through how.

The North Carolina labor department’s point applies everywhere: the law cares that you keep an accurate record of hours worked each day and week. Rounding is permitted around that duty, never in place of it.

Promo: time tracking built for subcontractors

Time Budge is the labor tracking app in the Won2Build Hub, our suite for construction subcontractors. It tracks time and labor from the field, syncs in real time between field and office, works on mobile and reports per project. It is $199 per month per company, plus $2 per month per active field worker, and you can start with a free trial. See Time Budge or compare plans on the pricing page.

Won2build

All the apps sit behind one login, so hours that your crews record are available for change orders and job costs without re-entering them. The Hub and Takeoff are $0 per month, and you can subscribe to the full bundle or to individual apps. Details are on the Won2Build Hub page.

Perspective

Most rounding problems we hear about on the subcontractor side do not start with a bad policy. They start with lost information. A foreman writes down 8 hours for everyone because that is what the day was supposed to be, and by the time payroll sees it, nobody can say what the real times were.

Our view is that a rounding rule is only as good as the data under it. When the real start and stop times are captured from the field and are visible to the office, you can run any policy you choose, check it against the raw numbers and fix it before it becomes a claim. When the field and the office keep separate versions of the day, every rule becomes a guess.

That is why we built Time Budge for the way subcontractors work: foremen and crews recording time on their phones, the office seeing it in real time, and hours tied to the project they belong to. It sits in a single login with CO Hub, Bid Track and Takeoff, so the same labor data supports change orders and bids rather than being typed in twice. Protecting margin starts with knowing what your labor actually was.

Jen Reese

FAQ

Is the 7-minute rule required by law?

No. It is a convention for applying quarter-hour rounding, not a legal requirement. The regulation allows rounding to the nearest 5 minutes, one-tenth of an hour or quarter hour, as long as it does not shortchange employees over time. The 7-minute rule is a common way to meet that test, since it rounds down and up in equal measure.

Can I always round down to avoid paying for early punches?

No. A policy that always rounds in the company’s favor is not neutral and can violate minimum wage and overtime rules. The Department of Labor’s fact sheet specifically warns about always rounding down. If you do not want to pay for time before the shift, the proper tool is a policy on early arrival and an authorization process, since employees who arrive early and do no work need not be paid for that time.

Do I need a time clock or signed timecards?

Federal rules say time clocks are not required, and North Carolina’s labor department confirms that its state law does not require time cards either. What you do need is an accurate record of the hours worked each day and each workweek. How you capture those records is up to you, as long as they are accurate.

Does rounding apply differently in California?

Yes, it can. California courts have accepted neutral rounding in the past, but recent decisions question it where exact punch times are already recorded, and meal periods are under particular scrutiny. If you have crews in California, paying on the actual recorded minutes is the simplest way to stay clear of the issue, and an employment attorney can confirm what applies to your situation.

How do I know if my policy is neutral?

Compare the raw punch totals to the paid totals for a set of pay periods, by employee and by crew. If the paid total comes out consistently lower, the policy favors the company in practice. If it swings both ways and nets close to zero, it is behaving neutrally.

Sources

Recommended

Try Won2Build

One login for estimating, bid tracking, change orders, and labor.

The Hub is free. Pay only for the apps you turn on.

Create your free Hub account
More reading